CAMP CHAIR INFORMATION
Looking for guidance on how to best use your camp chairs? Please refer to the youtube videos below or the FAQ section below them.
Skip to content
Looking for guidance on how to best use your camp chairs? Please refer to the youtube videos below or the FAQ section below them.
No, we recommend spot cleaning as necessary with soap and warm water.
You can switch from “camp mode” to “beach mode” by pulling the legs out from the frame and tucking them up into their designated slots. This lowers the frame closer to the ground for a more relaxed mode of sitting.
The maximum recommended weight capacity is 250lbs.
During initial setup, some customers may find Step 3 (in setup instructions) difficult due to the tightness of the seat fabric. This fabric is designed to be taut to provide a stable seating surface, however it will stretch over time. Once you are on Step 3 of the setup instructions use the following method to make initial setup easier.
1) After attaching one side of the front of the seat to the corresponding front support, lay the high back chair on its side with the front support that has not been attached facing upwards.
2) Apply downward pressure on the front support of the frame while pulling upwards on the seat fabric. NOTE: The chair frame is designed to flex.
We recommend using soap and warm water to spot clean by hand.
The high back chair has a weight limit of 250lbs.
REPLACEMENT PARTS
* Cascade Mountain Tech replacement parts are designed to be use for only Cascade Mountain Tech camp chairs, we do not advise using with other manufactures product.*